Sodium hydroxide, sulfuric acid, hydrochloric acid, iron sulfate, aluminum sulfate, calcium hydroxide, sterilizer and activated carbon, etc.
Organic polymer coagulant
Organic polymer coagulant effective for wastewater treatment and sludge dewatering.
1) Separation by settling and floating is promoted with high coagulation efficiency.
2) The sludge water content can be reduced.
3) A variety of product lineup is available for different types of wastewater.
Powdered activated carbon
Powdered activated carbon used for improving activated sludge performance.
1) Reducing COD/ BOD in treatment.
2) Improving sedimentation and sludge dewatering.
3) Effective in decolorization, defoaming, and deodorization.
Enhancing activated sludge process
Biological agents used for the types of wastewaters that are difficult to treat by activated sludge.
1) Decomposition of n-hexane extracts.
2) Decomposition of chlorinated solvents, such as trichloroethylene.
3) Decomposition of grease and detergent components.
4) Deodorizing and decomposition of oils by enzymes.
Biological agents for balancing nutrients
Balanced nutrients with optimal N:P ratio of 1:5 for activated sludge.
1) Cost can be reduced compared to using of phosphoric acid, uric acid, etc.
2) The pH is neutral and safe to handle.
3) Containing extremely low level of heavy metals, such as As, Cd, and Cr, and no risk of secondary pollution.
4) Iron tanks can be used since the agents are non-corrosive.
5) Easy maintenance and management.
Treatment of hazardous substances
A new inorganic water treatment agent that can treat wastewater containing hazardous substances, such as boron, fluorine, selenium, and heavy metals, at low cost and with high efficiency.
1) Facility investment can be reduced since general coagulation process is used.
2) The chemical used for treatment is derived from natural products and low cost.
3) The composition of the chemical can be customized based on the properties of water.
Wastewater defoamer
An excellent defoamer agent for industrial wastewater. It can reduce the cost by about 1/2 to 1/4 compared to other products.
A wide variety of products are available to respond customer needs.
1) A low cost defoamer and a small dose can be effective in eliminating foaming.
2) Compatible with factory wastewaters and all types of foaming in the manufacturing process.
3) It does not hinder the activity of bacterial cells such as activated sludge.
4) The main ingredient is silicone, non-toxic and safe.
Coagulant
A harmless coagulant, constituted with natural-inorganic substances, with no burden on the environment. It is applicable to various kinds of wastewaters with high coagulation capacity.
1) Environmentally friendly, high safety and easy to handle.
2) Flocks can be formed quickly and thus the solids settle very fast.
3) The solids are tough and low-viscosity. The later process can be simplified.
Organic coagulant
Relatively small molecular weight of polymer cation. It is effective in colloidal suspension in water to form small settling flocks and allow efficient aggregation process.
1) The inorganic coagulant use can be decreased.
2) Decolorization and COD can be reduced.
3) The sludge production can be decreased significantly.